砾岩在不同矿化度下的岩电参数变化规律   总被引：1，自引：1，他引：1  

赵发展  王赟  何亿成 《物探与化探》2004,28(2):116-118

为解决地层含油饱和度计算误差的问题,用不同矿化度地层水进行了地层因素和电阻增大率的实验,发现了砾岩储层岩电参数的变化规律。进一步有效地利用这一规律可以对含油饱和度的计算误差进行校正,从而修正开发储量中的计算误差。这一规律的研究对克拉玛依砾岩油藏的开发具有重要的指导意义。  相似文献   

用L-曲线法确定半参数模型中的平滑因子   总被引：7，自引：0，他引：7  

王振杰  欧吉坤  曲国庆  韩保民 《武汉大学学报(信息科学版)》2004,29(7):651-653

提出了一种新的方法——L-曲线法确定平滑因子。通过确定合适的平滑因子，更好地控制了残差部分V^TPV与光滑度部分S^TRS之间的平衡，得到了更准确的参数估值。通过算例，将基于L-曲线法确定平滑因子的半参数模型解算方法和其他方法进行了比较。结果表明，用L-曲线法确定平滑因子后，提高了半参数模型计算结果的精度，可以更好地将观测值中的系统误差分离出来。  相似文献   

高分辨率遥感影像的精纠正   总被引：10，自引：1，他引：10  

张剑清  张勇  郑顺义  张宏伟 《武汉大学学报(信息科学版)》2004,29(11):994-998

论述了对高分辨率遥感影像进行精纠正获得正射影像的关键技术。若干实际不同分辨率的高分辨率遥感影像被用于相应的实验，实例证明了本文算法的正确性。  相似文献   

利用AMTIS数据反演植被和土壤温度     

范文捷  徐希孺  王奋勤  刘强 《遥感学报》2004,8(4):295-299

遥感陆面温度 (LST)是目前遥感界面临的重要课题 ,组分温度反演则为LST反演的主攻目标。如果混合像元组分间的温度及发射率存在明显差别 ,就可以从多角度热辐射亮度变化中分离出组分温度的信息。在热辐射矩阵模型的基础上 ,讨论了确定可反演参数和反演组分温度的方法 ,并以AMTIS多角度热红外图像为数据源 ,在进行几何和大气纠正后 ,尝试利用矩阵反演方法分解混合像元中的植被和土壤温度。误差分析表明土壤温度反演结果较好 ,但植被温度的反演精度不高  相似文献   

利用现有重力场模型求定CHAMP卫星加速度计修正参数   总被引：3，自引：0，他引：3  

徐天河  杨元喜 《测绘学报》2004,33(3):200-204

CHAMP卫星加速度计数据的标定是通过确定其尺度因子和偏差参数来完成的.本文基于能量守恒方程,给出利用现有重力场模型标定CHAMP卫星加速度数据的基本原理和数学模型;提出相邻历元间差分算法,大大简化了观测方程,同时避免积分常量的计算.该算法既能同时解算尺度因子和偏差参数,也可任意求解其中之一.基于实测的CHAMP卫星加速度数据,利用EGM96模型和最新公布的EIGEN-2模型进行计算与比较,验证该方法的有效性.  相似文献   

用L-曲线法确定岭估计中的岭参数   总被引：15，自引：0，他引：15  

王振杰  欧吉坤 《武汉大学学报(信息科学版)》2004,29(3):235-238

运用L 曲线法来确定岭估计中的岭参数 ,推导了用L 曲线法确定岭参数的基本公式 ,在此基础上实现了其算法 ,并用两个算例 ,比较了新方法和以往方法。结果表明 ,L 曲线法不仅容易收敛 ,而且其计算结果的精度较高  相似文献   

Identification of structural parameters of multistorey shear buildings from modal data     

S. Chakraverty 《地震工程与结构动力学》2005,34(6):543-554

A procedure has been presented in this paper to identify the structural parameters, viz. mass and stiffness matrices, from modal test data for multistorey shear buildings. The first two orders of modal data have been used by other researchers to estimate the global matrices where they depend only on measurable points which are less than the total number of structural degrees of freedom. The above method has been refined here by using Holzer criteria along with other numerical methods to estimate the global mass and stiffness matrices of the structure. This shows the methodology to be more efficient and accurate. The reliability of the procedure has been shown by examples of multistorey buildings. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

Research on anisotropic parameters by syn-thetic seismogram     

范小平  李清河  杨从杰 《地震学报(英文版)》2005,18(2):196-205

Introduction The anisotropy of the Earth crust medium is a common phenomenon(Crampin,1984).More and more observation materials and study results have proved that on most of the Earth′s upper crust is spread fluid-filled cracks and microcracks,which are aligned according to the contempo-rary stress-field.Such distributions of aligned cracks show effectively anisotropy to seismic wave and the phenomenon is called extensive-dilatancy anisotropy(EDA)(Crampin et al,1984).At the same time,it is …  相似文献   

A study on the focal parameters of Shidian M =5.9 earthquake sequences in 2001     

Qin Jia-zheng  Qian Xiao-dong  Ye Jian-qing 《地震学报(英文版)》2005,18(3):269-279

On the basis of about 300 earthquake wave forms observed in the Shidian M _S=5.9 sequences on April 12, 2001 recorded in Kunming Digital Seismic Network, the spectra of shear wave have been used to estimate the focal parameters of these earthquake sequences. The results show that within the magnitude range of 1.5–5.3, the seismic moments are 10¹⁰–10¹⁶ N·m, the corner frequencies are 0.2–0.8 Hz, radii of the focal rupture are 200–2 500 m and the stress drops are 0.1×10⁵–20×10⁵Pa. Through the statistical analyses of variation of corner frequency f _c and stress drop Δσ with time, it is discovered that the average corner frequency of the foreshock sequences is obviously lower than that of the aftershock sequences. Contrarily, the average stress drops Δσ of the foreshock sequences are clearly higher than that of the aftershocks. It is considered that these variation characteristics of average corner frequency and stress drops before and after the main shock have index significance to the precursory information before a strong earthquake. The higher stress drops for the foreshock sequences show that the higher shear stresses have been stored in the area of main shock. After the main shock, most of the stresses have been released, so the aftershock sequences show a rupture process of lower stresses. Foundation item: Scientific and Technological Key Project of Yunnan Province (2001NG46)  相似文献   

Study on the Source Parameters of Earthquakes in the Middle Eastern Area of North Tianshan in Xinjiang     

Zhao Cuiping 《中国地震研究》2005,19(4):381-390

INTRODUCTIONThe study of source parameters is usually based oninversionfromobservational seismic waveformdata.Seismic wave affected bygeometric spreading,inelastic attenuation,scatteringandsite effects ofthe mediumontheir way fromsource to station.Therefo…  相似文献